Table of Contents
Advertisement
equipment. You could change the name to make it easier to identify.
1.
Touch setting to open setting application.
2.
Touch wireless, network and bluetooth one by one. And it will open
"bluetooth setting" screen.
3.
If the bluetooth is not open, pls select Bluetooth and open it.
4.
Touch the name of bluetooth, then put in one name and the touch
yes.
Make the bluetooth of MID paired.
You can not make the MID connected with the other before the MID
paired. After they paired, the status should continue unless you quit it.
1.
Touch setting so that you can open the setting application.
2.
Touch setting of wireless, network and bluetooth one by one.
3.
If the bluetooth is not open, pls select bluetooth and open it. Your
MID should scan the bluetooth of other equipment auto in the
coverage.
4.
If you can not find the equipment you want to pair, then you should
set the other equipment in the status of "detected"
5.
If you MID stop scan before you make the other equipment in the
status of "detected"， pls touch scan to find equipment.
6.
In the list of " bluetooth setting", touch the ID of other equipment,
then the MID could be paired. If the system ask you to input the
password， pls try the normal ones such as "0000" or "1234" Or
considering the instructment of your bluetooth setting. If paired
successfully, the MID should get connection with the related
equipment.
After connecting with the bluetooth
You can connect bluetooth equipment after paired. For example, you could
change the equipment or reconnect the MID when you come to the
coverage.
1.
Touch setting to open the setting application;
2.
Touch setting of wireless, network and bluetooth one by one;.
3.
If you do not open bluetooth, pls select and open it;
4.
In the list of equipment, pls touch to connect the equipment paired
already. If there is no equipment you want to pair in the list, pls
touch scaning to find the equipment. If the MID is connected with
10
Advertisement
Table of Contents
