Sound Settings - ViewSonic VB70a Pro User Manual

Static IP Settings
If you need to enter the IP address in a wired Ethernet connection to the
environment, please contact the administrator to enter the IP ( it is the
same with PC).
Touch menu " setting", " wireless and network", "Ethernet setting",
"Static IP setting" and choose using the static IP. Enter the IP address,
gateway, net mask, DNS1 or DNS2 as the information supplier by the
administrator. Then if you enter the right one, Ethernet icon in the status
bar will display a connection network of animation. After stopping, the
icon should change to connect or not connect.

4.2 Sound settings

You can use the "Sound Settings" configuration on the touch screen of
your MID to click the sound, e-mail arrival reminding, update the
application upgrade , memo reminding, keyboard touching, or through the
way of ring and volume to remind you when the alarm rings. You can also
use these settings to adjust the volume of music or other media with audio
as well as some related settings.
Silent mode
Select the option to mute all the sounds of MID, except for the music,
video and other media as well as all the audio that you set for the alarm
clock. (You must mute the media and alarm in the own application.)
Volume
Select the option to open a dialog box for you to set the ringtone, play
media (music, video, etc.) and volume of notification ringtones. If you
cancel the selection of using same volume for the ringtones and
notification tones, then you can set the notification ringtone's volume
individually.
MID ringtones
Select the option to open a dialog box for you to choose MID alerts (such
as alarm clock, memo reminding) to play your ringtones. You can touch a
ringtone to listen.
Notification ringtone
Select the option to open a dialog box for you to choose the ringtones
which will be played when receiving notifications. You can touch a
ringtone to listen.
16