ViewSonic VB70a Pro User Manual page 31

application, only could open the keyboard when you touch the words
which you want to be revised.
1. If there are some word in the word field. The operate will set the
insertion point in the place which you touch. And show the label of
insertion point. You could move the insertion point by this label to choose
the correct location. So that, You could add more words. You also could
choose one or more words, and copy, cut, paste them.
2. Click the key . The next letter which you input will change into
capitalization. When you re-click this icon, All the letter in the keyboard
will be changed into capitalization.
3. Click the key , The dialog box will popup to remind you to change
the input method or set the keyboard.
4. Click the delete key to click the word in the left of the cursor. After
inputting. Please press to close the keyboard.
Input number, symbol and other character.
Touch and press some key in the first line, don't move the finger, and then
relax. You could input the black number.
If there is some alternative character, the suspensions point will be show
in the bottom of the key.
Touch the vowel letter or "C","N" or "S" to open a window to move the
vowel letter, or other alternative letter or number.
Click the signal key to change it between from number and signal.
Click the " Alt" to check other signal. And click this key again to change
it into the original keyboard.
31