Recalling Variable Values - Texas Instruments TI-84 Plus CE Getting Started

Note: Image Vars are run and stored in archive, but when an Image Vars displays in
VARS 4:Picture & Background

Recalling Variable Values

To recall and copy variable contents to the current cursor location, follow these steps.
To leave Rcl , press '.
1. Press y K. Rcl and the edit cursor are displayed on the bottom line of the
screen.
2. Enter the name of the variable in one of the following ways:
Press ƒ and then the letter of the variable.
•
• Press y 9, and then select the name of the list, or press y d or e,
and so forth.
• Press y ¾, and then select the name of the matrix.
Press ½ to display the VARS menu or ½ ~ to display the VARS Y-VARS
•
menu; then select the type and then the name of the variable or function.
Press ƒ a to display the YVAR shortcut menu, then select the name of the
•
function.
The variable name you selected is displayed on the bottom line and the cursor
disappears.
3. Press Í. The variable contents are inserted where the cursor was located
before you began these steps.
Notes:
• You can edit the characters pasted to the expression without affecting the
value in memory.
• You can use Rcl in the Y= editor to paste a current function to a new YVar to
avoid retyping long expressions.
50 Working with Variables
, the BACKGROUND menu does not display the asterisk
*
.