CDA PC880 Installation, Use And Maintenance Manual page 20

Loud click - Normal noise and is usually the thermostat switching the
compressor on or off.
Ticking sound - Normal noise that is usually caused by the functions
of a valve at the back of the refrigerator.
Motor sound - Normal noise caused by the compressor running,
sometimes accompanied by a brief metallic rattle. This sound may be
more intense for the first seconds after the compressor starts. If the
metallic noise (i.e. metal hitting metal) is constant then it may be that a
compressor mount is loose. Contact the Customer Care Department
in this instance.
Bubbling noise - Normal noise caused by the movement of the
refrigerant within the appliance's pipework.
Gentle whir and/or 'mooing' noise - Normal noise caused by the
internal fan(s) of the appliance and circulating air.
Fault codes and symbols
In the event of a failure of one or more parts of the appliance, an out-
of-limit temperature measurement or a power issue, the appliance will
display a fault code and the warning symbol (page 11) may illuminate.
These fault codes normally necessitate a service visit. Please contact
CDA Customer Care using the details below.
A: Customer Care Department, The CDA Group Ltd, Harby Road,
Langar, Nottinghamshire, NG13 9HY
T: 01949 862 012 F: 01949 862 003
E: customer.care@cda.eu W: www.cda.eu
20