Information Codes - Samsung WF16J6 User Manual

Troubleshooting

Information codes

If the washing machine fails to operate, you may see an information code on the screen.
Check the table below and try the suggestions.
Code
1C
TC2
DC
DC1
LC
4C
46 English
WF16J6500EV_DC68-03665C_EN.indd 46
Check the water level sensor.
• Power off and power the machine on after 2-3 minutes, and
then try again.
• Depending on the model, the drain system drains water
automatically. The POWER and START/PAUSE buttons may be
disabled during this process.
Check the temperature sensor on the dry air.
• Power off and power the machine on after 2-3 minutes, and
then try again.
The door is open.
• Close the door and press START/PAUSE to resume operation.
Check the door switch.
• Power off and power the machine on after 2-3 minutes, and
then try again.
Check for water leaks.
• Power the machine off and check the drain system for any
leak. Once the leak is solved, power the machine on after 2-3
minutes.
• Depending on the model, the drain system drains water
automatically. The POWER and START/PAUSE buttons may be
disabled during this process.
Check the water supply line.
• Check for the connection of the water line (including water
taps).
• Power off and power the machine on after 2-3 minutes, and
then try again.
• Depending on the model, the drain system drains water
automatically. The POWER and START/PAUSE buttons may be
disabled during this process.
Action
2017/10/20 14:27:57