ABTronic NARL User Manual page 10

PAGE 10
APPLYING GEL PADS
Precautions
Do not use damaged, worn or dirty gel pads as this might
„
result in burns.
Always, stick gel pads to all electrodes while using the
„
product. Don't apply the product directly to skin, this may
be painful or cause irritation or burns.
1. Take the gels pads out of the bag and peel off one
side of the protective film which has no wording
from the gel pad.
2. Stick the gel pads onto each of the 4 conductive
areas on the rear side of the NARL™ pad.
* Please make sure the gel pad has protective film, which
has no wording, is stick onto the stimulation pad
• If there is an air bubbles under the gel pads use a finger
and press the air to the side of the pad to escape.
ABTRONIC™NARL™ USER MANUAL