Related Manuals for IFM VSE150
Summary of Contents for IFM VSE150
- Page 1 Installation instructions Diagnostic electronics for vibration sensors VSE150 VSE151 VSE153...
-
Page 2: Functions And Features
1 Functions and features The diagnostic electronics has 2 analogue inputs and 4 dynamic inputs. These inputs can be used for process value monitoring, vibration monitoring, vibration diagnostics or analysis of other dynamic signals. 2 Symbols used ► Instructions Important note Non-compliance may result in malfunction or interference. -
Page 3: Electrical Connection
The national and international regulations for the installation of electrical equipment must be adhered to. ► Disconnect the system from power and connect the unit. 4.1 Interfaces LEDs VSE150 VSE151 VSE153 1: Confi g: TCP/IP, IP address 192.168.0.1 (factory setting), parameter setting and data interface (e.g. VES004) -
Page 4: Parameter Setting
When using an IEPE input 24 V + 20% (Integrated Electronics Piezo Electric) 5 Parameter setting Parameter setting and configuration of the unit are exclusively made via the PC software VES004. 6 Technical data, approvals/standards Detailed manuals, technical data, EC declaration of conformity, approvals and further information can be found at www.ifm.com. -
Page 5: Maintenance And Disposal
7 Maintenance and disposal The unit is maintenance-free. ► Dispose of the device including the battery in accordance with the national environmental regulations. 8 Scale drawing 105,3 100,6...