Installing The Batteries; Handling The Batteries - Hitachi DV-P445E Instruction Manual

Installing the Batteries

1. Press and lift the back cover up to open the
battery compartment of the remote control.
2. Insert two AAA size batteries (not supplied).
Install the batteries correctly by following the
polarity (+ and -) indications in the battery
compartment.
3. Close the battery compartment cover.
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.

Handling the Batteries

• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could
cause fire, personal injury or damage to property.
• When the batteries are exhausted, the remote will not function. Replace both batteries at
the same time with new ones.
• Only use the battery type indicated in this manual.
• Do not install new batteries with used one and do not mix different types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance with
local regulations.
GB
GB-11