Installation; Unpacking The Unit; Wheel Assembly - BONAIRE Durango 3500M Owner's Manual

BONAIRE PORTABLE COOLER

Installation

Installation

Unpacking The Unit

Important
When you receive your unit the wheels, remote
control and accessory bag will be located inside
the box.

Wheel Assembly

Before installing the wheels the unit
down as shown.
As shown in the picture, lie the unit down carefully and place
the wheel screw end in to the recess under the tank as shown.
Then tighten the wheel in by using the spanner. Once all 4
wheels are assembled then carefully stand up the unit without
damaging a rear filter panel.
Note: Wheels must be locked when operating the unit. To lock
and unlock the wheels please refer the picture.
MUST
be laid
Spanner
Lockable wheels
fitted to front
Press to
Lock
Lift to
Unlock
Page | 7