Remote Control Operation - BONAIRE Durango 3500M Owner's Manual

BONAIRE PORTABLE COOLER
Operation Instructions
1.
POWER (Start and stop operation)
2.
FAN – LOW (starts low fan speed but there will be no pump operation until button 5 is pressed)
3.
FAN – MEDIUM (starts medium fan speed but there will be no pump operation until button 5 is
pressed)
4.
FAN – HIGH (starts high fan speed but there will be no pump operation until button 5 is pressed)
5.
Cool (turns pump and fan continues to operate on previously selected speed)
6.
NOT APPLICABLE FOR THIS MODEL
7.
NOT APPLICABLE FOR THIS MODEL
8.
NOT APPLICABLE FOR THIS MODEL
9.
PUMP ONLY (turns pump on at first button press & turns pump off at second button press. NOTE:
there will not be any fan operation with this function, pump only)
NOTE:
For pump only operation the
1. The pump only button
2. If the cooler is running pressing
before pressed, it will only turn off fan).
3. Press to turn off the main pump. If the pump only function is required again press
to turn on the main pump.
4. If cooling is required when the main pump is running on, press Cool
the main pump continues to run.
5.
When the pump only function is selected by pressing
following buttons

Remote control operation

button is selected, the operation will be as follows:
can only be activated only when the power is on.
will turn off fan and turn on main pump (If the main pump is on
/ / ..
，and this will start the fan while
, you cannot start the fan by pressing the
and then
Page | 12