3 Operation
1
Use
to select the Date/Time.
2
Press
3
Use
to select the required settings.
4
Press
3.3.6 Setting the language
You need to go to menu screen first and then select Settings.
4
Use
to select Language.
5
Press
6
Use
to select the required Language.
7
Confirm by clicking
Exit from the menu is automatic and the language is applied.
When the unit system is changed, the units specified in the Basic View
are overwritten.
3.3.7 Showing general device information
Under the General menu item, you will find all of the information about the
testo 440 and connected probes. You can also reset the instrument to default
settings.
You need to go to menu screen first and then select Settings.
1
Use
to select General.
2
Press
The following information can be viewed:
18
or
on the navigation key.
or
to exit the menu.
or
on the navigation key.
.
or
on the navigation key.