Fujitsu Citrix XenServer Configuration Manual page 3

This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX to a server running Citrix
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX, servers, OS, SAS cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX.
The Contents and Structure of this Manual
This manual is composed of the following eight chapters.
"Chapter 1 Workflow" (page 7)
•
This chapter describes how to connect the ETERNUS DX storage systems to a server running Citrix
®
er .
"Chapter 2 Checking the Server Environment" (page 9)
•
This chapter describes which servers can be connected to ETERNUS DX storage systems.
"Chapter 3 Notes" (page 10)
•
This chapter describes issues that should be noted when connecting the ETERNUS DX storage systems and
server.
• "Chapter 4 Setting Up the ETERNUS DX" (page 12)
This chapter describes how to set up an ETERNUS DX.
"Chapter 5 Setting Up the SAS Switches" (page 13)
•
This chapter describes how to set up the SAS switches.
"Chapter 6 Installing the Driver" (page 15)
•
This chapter describes how to install the SAS card drivers.
"Chapter 7 Setting Up XenServer" (page 16)
•
This chapter describes how to set up Citrix
"Chapter 8 SAN Boot" (page 21)
•
This chapter provides notes for SAN Boot.
®
XenServer
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Citrix
Copyright 2017 FUJITSU LIMITED
®
via a SAS interface.
® ®
XenServer .
3
Preface
6th Edition
September 2017
®
® ®
XenServer
P3AM-8552-06ENZ0
XenServ-