Table of Contents
Advertisement
Chapter 7
Setting Up XenServer
7.5
Setting the Multipaths
For XenServer versions 6.2.x to 6.5.x
•
Delete the "#" marks from the beginning of the following default definition in the "/etc/multi-
path.conf" file and enable the definition.
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Delete the "#" marks
3
Enable multipath.
(1)
Select [Server] from the XenCenter menu bar and open [Properties].
(2)
Select [Multipathing] in the [Properties] screen, check "Enable multipathing on this server", and
click the [OK] button.
4
Release the maintenance mode, and then reboot the server.
device {
vendor
product
getuid_callout
features
hardware_handler
path_selector
path_grouping_policy
failback
rr_weight
no_path_retry
rr_min_io
path_checker
prio
}
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Citrix
Copyright 2017 FUJITSU LIMITED
"FUJITSU"
"ETERNUS_DXL"
"/sbin/scsi_id -g -u -s /block/%n"
"1 queue_if_no_path"
"0"
"round-robin 0"
group_by_prio
immediate
uniform
10
1000
tur
alua
19
®
®
XenServer
P3AM-8552-06ENZ0
Advertisement
Table of Contents
