Connection Indicator
Display
Description
Transmission
'
OK
Not connected Check the channel and ID.
w
Too many units Change the master and slave unit total to 16 or less.
x
Error
If the transmission channels of the master unit and slave unit are
different, the slave unit will not fire. Set them both to "AUTO" or set them
to the same number.
If the wireless radio IDs of the master unit and slave unit are different, the
slave unit does not fire. Set to the same number.
For the remote release from a slave unit, <e> is displayed on the
LCD panel.
Radio Transmission Wireless Settings
You can check the transmission status
by viewing the icons on the LCD panel.
Turn the master unit and slave unit off and on again.
Action
-
67