Canon Macro Twin Light MT-26EX-RT Instruction Manual page 79

[: Shooting in a Different Flash Mode for Each Group
Set each firing group.
3
Set the flash mode of each firing
group by operating the master unit.
With <M> displayed, press
function button 3 <F> (p).
Turn <9> to select the group to set
the firing group.
Setting the flash mode
Press function button 2 <2>,
then select the firing mode from
<a>, <q>, or </>.
Setting the flash output and flash
exposure compensation amount
Press function button 3 <1>.
Turn <9> to set the flash output or
flash exposure compensation
amount, then press <8>.
When using the <q> mode, set the
flash output. When using the
<a> or </> mode, set the
flash exposure compensation amount
as required.
Repeat step 3 to set the flash function
of all firing groups.
If you press function button 2
<@> when <M> is
displayed, flash exposure
compensation can be set for all the
firing groups.
79