Kelley HK-S User Manual page 27

7. To return the dock leveler to the stored position when
loading or unloading is complete, or to load end loads:
7.1 Push and hold the raise button. The ramp will
rise and the lip will lower.
7.2 Release the Raise button when the lip clears the
vehicle bed. The ramp will lower to the dock level
(stored) position.
7.3 Check that the lip is not extended and the ramp
is supported by both dock level supports before
driving or walking on the ramp. Ramp should be
level with dock floor.
8. Unchock or release vehicle.
9. Tell vehicle driver "your vehicle may now leave the
dock."
beLow Dock conTroL (bDc)
To lower the ramp without extending the lip for end loading
below dock level:
1. Press the raise button and hold it until the ramp is 6" to
12" above dock level. Release the raise button before
the ramp reaches its highest position.
2. As ramp is lowering, walk onto the ramp and pull the
BDC chain located in the middle of the ramp until it is
fully extended. Hold the chain until the ramp passes
below dock level. See Fig. 27.
3. Release the BDC chain.
4. Load or unload end loads.
5. When loading or unloading is complete, return the dock
leveler to the stored position.
5.1 Push and hold the raise button until the ramp is
at least 4" above dock level.
5.2 Release the raise button before the ramp
reaches its highest position. The ramp will lower to
its stored position.
5.3 Visually check that the lip is not extended and the
ramp is supported by both dock level supports
before driving or walking on the ramp. Ramp
should be level with dock floor. See Fig. 28.
6. Unchock or release vehicle.
7. Tell vehicle driver "your vehicle may now leave the
dock".
March 2014 6004753N — Hydraulic Dock Leveler - One Button Control — Safe
sTanDarD oPeraTion,
Before allowing vehicle to leave always return the dock
leveler to its dock level (stored) position with the dock
level support legs supported by the front dock level
supports. Failure to do so may leave the dock leveler
in a position below the level of the dock floor. This
condition may result in unexpected drop of personnel
or material handling equipment and result in death or
serious injury.
Fig. 27
Fig. 28
continued
BDC chain
Dock level
support leg
Front angle
dock level
support
T
Frame
™
©2014 4Front Engineered Solutions, Inc.
27