Server Network Settings; Connect To Server; Magicinfo Mode; Server Access - Samsung SBB-SSF User Manual

Server Network Settings

m MENU → Network → Server Network Settings

Connect to server

To run Player connect to a network.
• Server Address / SSL / Port
― If the
SSL option is enabled, the server is configured to use https and data transfer is
encrypted.
― Enter the server IP address and port number. Use 7001 as the port number. (If unable to
connect to the server using port number 7001, check with your server administrator to find
the correct port number and then change the port number.)

MagicInfo Mode

Select the appropriate MagicInfo Mode
product.
• Lite / Premium

Server Access

Select a method to connect the server network.
• Allow / Deny
→ E
depending on the environment where you are using the

FTP Mode

Specify the FTP operating mode.
• Active / Passive

Proxy server

Set up your proxy server connection and related functions.
Off / On
• Address / Port / ID / Password
―
Address / Port / ID and Password

Device Name

m MENU → Network → Device Name → E
Select or enter a device name.
This name can be shown on network remote controls over the network.
• [Signage]Display 1 ~ 6 / User Input
are enabled only when Proxy server is set to On.
71