Write And Send An E-Mail - Philips 855 User Manual

• POP3 address: allows you to enter the IP or DNS
address of the POP3 server, which is used to
receive e-mails.
• address: allows you to enter the IP or DNS
SMTP
address of the SMTP server, which is used to
send e-mails.
WARNING ! Network-dependent! For an e-mail connection
via GPRS, if your phone operator is not your e-mail
provider, contact your operator to get the correct address of
the SMTP server and enter it in this field.
In some cases, Login,
Password
up to you when you subscribe to your account. Enter
them as defined.
Account name
This menu allows you to rename the available e-mail
accounts.
An e-mail account might be preconfigured with the
name of your operator. In this case, its name cannot be
changed.
,
1. Press , select
Messages
Settings > Account name
2. Enter the new name in the edition window that
,
appears and press
Messages
and are
E-mail address
> >
E-mail E-mail 1
,
and press .
.
Advanced
The menus described in this section feature advanced
settings that may have been pre-configured, so you
shouldn't have to change any of them.
If the fields of these menus are empty, or if you
encounter connection problems, contact your ISP.
POP3: allows you to enter the POP3 port
Port
number, which is used to receive e-mails.
SMTP: allows you to enter the SMTP port
Port
number, which is used to send e-mails.
address: allows you to enter the DNS address of
DNS
the external data network you want to connect to.
SMPT authenticat.: allows you to activate/deactivate
the authentication process with the SMTP server.
In most European countries, this menu should be set to
Off: your e-mails will NOT be sent if set to On.
Contact your provider for complete information.

Write and send an e-mail

The
>
e-mails to one or several recipients at a
Send mail
time, including with an attachment
such as a jpeg picture. Once received, your messages
can be forwarded and the attachments visualised with
the appropriate software.
Send mail menu allows you to send
47