Philips 855 User Manual page 58

Another e-mail is attached to the one you re-
ceived (up to five e-mails can be attached
one after the other). There isn't any ad-
vanced options for an attached e-mail: it can
be read, but not stored nor forwarded.
A picture in JPEG, BMP or GIF format is
attached to this e-mail. Select the attached
picture in the list and press
store it in your mobile phone (you can re-
name it if you wish).
You must have stored a picture before being able to
view it via the Picture album menu. See "Picture
album" page 65 for more details. If there isn't enough
memory to store the new picture, you must delete other
items (name, event or picture) to release enough
memory to be able to save the new picture.
A picture may not be accepted by your mobile phone
if it is too large, or if it doesn't have the right file
format. When receiving a picture via e-mail, proceed
as follows to obtain optimal results:
• The picture received must have been saved in
JPEG, BMP or GIF format.
• The size of the picture file should not exceed
50 KB.
Messages
•
•
Add an e-mail address to the phonebook
,
You must have selected the phonebook in your phone
twice to
to be able to add an e-mail address; this menu item
will NOT appear if you selected the SIM phonebook.
Add to names
(retrieving the header only is sufficient to access the
e-mail address).
1.
2.
The optimal size is 128 x 128 pixels, in order to
be displayed correctly. We recommend you use a
standard picture editing software to create the
size of the picture you want.
Use a file name, a maximum of 10 characters.
You can then add an extension such as «.jpg».
You can add the sender's e-mail address
to your phonebook, even when you
haven't yet downloaded his e-mail
Select an e-mail header, then press
the carousel options.
Select and press
Add to names
- <new> to create a new name, enter first and
last name then add the associated e-mail
address, or
- a name in the list and press
e-mail address to this name card. If it already
contains an e-mail address, you will be
,
prompted to press
,
to access
,
. Then select:
,
to add the
to replace it.
51