Installing Memory Module; Heat Sink - Dell Latitude 7390 Owner's Manual

Installing memory module

1 Insert the memory module into the connector until snaps in.
2 Install the :
a battery
b base cover
3 Follow the procedures in

Heat sink

Removing heat sink assembly
Heat sink assembly comprises of heat sink and the system fan.
1 Follow the procedure in
2 Remove the :
a base cover
b battery
3 To remove the heat sink assembly:
NOTE: To identify the number of screws, see
a Disconnect the fan cable from the system board [1].
b Remove the M2.0 x 5.0 screws (6) that secure the heat sink assembly to the system board [2].
NOTE: Perform the order of the callout numbers [1, 2, 3] as indicated on the heat sink.
c Lift the heat sink assembly from the system board [3].
22 Removing and installing components
After working inside your
Before working inside your
computer.
computer.
screw list