Table of Contents
Advertisement
The settings are activated without
needing to be confirmed.
The settings are not saved after
switching off the washing machine.
Default program settings ~ Page 24
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the program
progress.
The button indicator lamps light up if a
setting is activated.
The settings are not saved after
switching off the washing machine.
Additional program settings
~ Page 25
Placing laundry into the drum
:
Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
Mix items of laundry of varying
■
sizes.Laundry items of different sizes
distribute themselves better during
the spin cycle.Individual laundry
items may cause an unbalanced
load.
Observe the maximum specified
■
load. Overfilling adversely affects the
washing result and promotes
creasing.
Operating the appliance
Unfold presorted laundry items and
1.
place them in the drum.
Make sure that no items of laundry
2.
are trapped between the door and
the rubber seal, and close the door.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Dosing
Dose the detergents and care products
according to:
Water hardness (ask your water
■
supply company)
The manufacturer's instructions on
■
the packaging
The amount of laundry
■
Soiling ~ Page 24
■
en
27
Advertisement
Table of Contents
