Table of Contents
Advertisement
Operating the appliance
en
Eco Perfect
■
Energy-optimised washing by
reducing the temperature while
achieving a washing result that is
consistent with the selected
program, without the Speed Eco
Perfect setting.
Press the button to do this. First of all,
you can select the Speed Perfect
setting. If you press the button again,
the Eco Perfect setting is active. The
respective symbol is shown in the
display when the setting is activated.
If you press the button again, no setting
is active.
Easy-Iron
(p, Easy-Iron p, Easy Iron)
Button depending on the model
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
The washing's residual moisture
Note:
is increased.
Water&Rinse+
(ë, à, Water/Rinse Plus, Water Plus,
Rinse Plus à, Extra Rinse à)
Button depending on the model
Higher water level and additional wash
cycle for particularly sensitive skin and/
or for areas with very soft water
Prewash
(T, Prewash T)
Button depending on the model
For heavily soiled laundry.
Pour detergent into
Note:
compartments I and II.
26
1
Operating the
appliance
P reparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 11
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
Use the programme selector to select
the programme you require. You can
turn the selector in either direction.
The appliance is switched on.
When the loading door is open, the
display shows the programme
information for the selected programme.
Change the programme
default settings
You can use the default settings for
each wash cycle or change them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
Advertisement
Table of Contents
