Video Mode; Factory Reset; Recording; Start Recording - Q-See QSD004 User Manual

5.15 Video Mode

Select NTSC or PAL video source.

5.16 Factory Reset

Press [ SEL] button to reload factory defaults, then the DVR will reboot, all
custom settings (including password) will be restore to factory default.
Caution: There is no confirming dialog box for this selection after you
press [ SEL] button, please be patient!
If you forget your password, please keep the system on main screen, and then
press [Pause] button ten (10) times, the DVR will reset the system. Then the default
password will be: [CH1] button six (6) times.
If the DVR is recording, please unplug the power supply and uninstall the HDD,
then connect power to boot DVR and press [Pause] button for ten (10) times.

6.1 Start Recording

Press [ REC] to start recording (as set in 5.7 Schedule Set).
DVR will display system information on screen.
10%
4
EACH REC [M] (T)
QSD004 User's Manual
Chapter 6: Recording
1
R
1
2
R
3
6
5
7
- 12 -
3
R
2
R
4
8
2008/07/01 16:22:30