Adjusting The Touch Screen - JVC EVERIO R GZ-R440 User Manual

Adjusting the Touch Screen

Adjust the response position when the touch screen is touched.
1
Tap "MENU".
≪PLAY
.
2
Tap "SETUP".
TOP MENU
RECORD
SETTING
OFF
CONNECTION
SETTINGS
.
3
Tap "TOUCH SCREEN ADJUST".
SETUP
TOUCH SCREEN ADJUST
.
The touch screen adjustment screen appears.
0
4
Tap "+". (3 times in total)
PRESS THE + MARK
1/3
.
Keep tapping "+" as its position changes with every tap.
0
If areas other than the "+" mark are tapped, errors will occur. Make
0
sure to tap the "+" mark.
5
Tap "+" again to confirm the adjusted positions. (3 times in total)
CONFIRM THE ADJUSTMENT
PRESS + MARK AGAIN
1/3
.
Keep tapping "+" as its position changes with every tap.
0
REC MENU
SETUP
6
Tap "OK".
COMPLETED
.
Setting ends and returns to the menu screen.
0
Caution :
Do not tap areas other than the "+" mark during touch screen adjustment
0
(steps 4 - 5). Doing so may cause the touch screen to malfunction.
Memo :
Adjust by lightly tapping with a corner of an SD card, etc.
0
Do not press with an object with a sharp tip or do not press hard.
0
Getting Started
OK
11