Combining Videos Recorded By Seamless Recording - JVC EVERIO R GZ-R440 User Manual

Combining Videos Recorded by Seamless
Recording
Videos that are recorded on two separate media and with "SEAMLESS
RECORDING" in the video recording menu enabled can be combined into
a single video.
" SEAMLESS RECORDING " (A p. 88)
1
Open the LCD monitor.
A
.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video.
2
Tap M to select the playback mode.
≪PLAY
.
3
Tap "MENU".
≪REC
.
4
Tap "EDIT".
TOP MENU
PLAYBACK
SETTING
OFF
SETUP
.
5
Tap "SEAMLESS REC CTRL".
EDIT
SEAMLESS REC CTRL
.
REC MENU
EDIT
CONNECTION
SETTINGS
6
Tap "COMBINE SCENES".
SEAMLESS REC CTRL
COMBINE SCENES
.
This unit starts a search to detect seamless videos.
0
Combining cannot be performed if no seamless videos are found.
7
Tap "YES".
THE ABOVE SCENE IS FOUND
COMBINE WITH THIS SCENE?
YES
.
8
Tap the media to store to.
SELECT THE MEDIA TO STORE
THE COMBINED SCENES
BUILT-IN MEMORY
.
9
Tap "YES".
START COMBINING THE SCENES?
YES
.
Combining of the videos starts.
0
After videos are combined, tap "OK".
0
Memo :
Seamless videos cannot be combined if there is not enough free space in
0
the built-in memory or SD card. Check the amount of remaining free space
before combining.
How to Enable Seamless Video Recording Again
To start seamless recording again after the previous session is complete, it
is necessary to combine seamless videos, or delete the combination
information of the seamless videos.
To delete the combination information of seamless videos, select "DEL
COMBINED SCENES" in step 6.
Editing
NO
SD CARD
NO
67