Table of Contents
Advertisement
Getting Started
Using the Touch Screen
The LCD monitor of this unit is a touch panel which enables operations by
touching the screen with your finger.
The operation buttons, thumbnails, and menu items are displayed on the
screen according to each mode (recording/playback/setting).
There are two ways to operate the touch screen, namely "tap" and "drag".
0
The following are some examples.
A Tap the button (icon) or thumbnail (file) on the screen to make a selection.
B Drag the thumbnails on the screen to search for the desired file.
Recording Screen
Playback Screen
0:01:23
0:01:23
4
Memo :
The touch screen of this unit is pressure-sensitive. When the touch screen
0
does not respond smoothly, apply slightly more force to your fingertip.
Do not press or rub with excessive force.
0
Do not operate the touch screen using an object with a sharp tip.
0
Perform "TOUCH SCREEN ADJUST" if the reactive area of the screen is
0
misaligned with the touched area.
"Adjusting the Touch Screen" (A p. 14)
You cannot operate the touch screen under water. Lock the screen to
0
prevent operation errors.
"Shooting under Water" (A p. 37)
Locking the Screen (when Shooting Underwater)
Lock the screen before using this unit underwater to prevent operation errors
on the touch screen due to water pressure.
Once the screen is locked, operations on the touch screen except L are
0
disabled.
The START/STOP (recording) button and the zoom lever can be used
0
while the screen is locked.
You can set for both video and still image modes.
0
If "SCREEN LOCK" has been set, it will take a longer time for the unit to
0
power off after closing the LCD monitor.
Setting the "SCREEN LOCK"
o
A Check that the unit is in the recording mode.
B Tap "MENU".
C Tap "RECORD SETTING".
D Tap "SCREEN LOCK".
The L button appears on the screen.
0
.
To cancel "SCREEN LOCK"
o
Tap the L button.
Memo :
"SCREEN LOCK" cannot be set for the following cases:
0
- during recording
- when "TIME-LAPSE RECORDING" or "DATE/TIME RECORDING" has
been set
14
.
Index screen (thumbnail display)
0:12:34
0:12:34
Adjusting the Touch Screen
Adjust the response position when the touch screen is touched.
1
Tap "MENU".
≪PLAY
.
2
Tap "SETUP".
TOP MENU
RECORD
SETTING
OFF
CONNECTION
SETTINGS
.
3
Tap "TOUCH SCREEN ADJUST".
SETUP
TOUCH SCREEN ADJUST
.
The touch screen adjustment screen appears.
0
4
Tap "+". (3 times in total)
PRESS THE + MARK
1/3
.
Keep tapping "+" as its position changes with every tap.
0
If areas other than the "+" mark are tapped, errors will occur. Make
0
sure to tap the "+" mark.
5
Tap "+" again to confirm the adjusted positions. (3 times in total)
CONFIRM THE ADJUSTMENT
PRESS + MARK AGAIN
1/3
.
Keep tapping "+" as its position changes with every tap.
0
REC
MENU
SETUP
Advertisement
Table of Contents
