Dynabrade 53271 Safety, Operation And Maintenance Manual

Dynabrade 53271 Safety, Operation And Maintenance Manual

Rebel series 7" & 9" diameter, right angle

Advertisement

Quick Links

Rebel Series Sanders
7" & 9" Diameter, Right Angle
Safety, Operation and Maintenance – Save This Document and Educate All Personnel
Model
Wheel Dia.
RPM
53271
7" (180 mm)
8,500
53273
9" (230 mm)
6,500
SANDER
Find The Most Current Offering of Support Documents and Accessories at www.Dynabrade.com
Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as
well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Standards Institute (ANSI).
Safety Requirements for abrading materials with coated abrasive systems – ANSI B7.7, Compressed Air and Gas Institute (CAGI) Safety
Code for Portable Air Tools – B186.1, Code of Federal Regulation – CFR 29 Part 1910, International Organization for Standardization (ISO)
Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.
Read and understand tool manual before work starts
to reduce risk of injury to operator, visitors, and tool.
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
Some dust created by sanding, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Carefully Read and Understand the General
and Sander sections found in Tool Safety and
Operating Guidelines (PN00001676) Before
Handling or Using Tool.
Tool Intent: Rebel Series Sanders are ideal for material removal using depressed center grinding wheels, or abrasive
flap discs. Follow Rebel Series Sanders back-up pad mounting instructions included with the tool.
DO NOT USE Tool for Anything Other Than Its Intended Applications.
Training: Proper care, maintenance, and storage of your air tool will maximize tools performance and reduce chance for accident.
Employer's Responsibility: Provide operators with safety instructions and training for safe use of tools and accessories.
Report to Your Supervisor any Condition of the Tool, Accessories or Operation you Consider Unsafe.
Autobalancer
Hp
Yes
2.8
WARNING

SAFETY and OPERATING INSTRUCTIONS

Eye protection must be worn at all times, eye
protection to conform to ANSI Z87.1.
Practice safety requirements. Work alert, have proper
attire, and do not operate tools under the influence
of alcohol or drugs.
Air line hazard, pressurized supply lines and flexible
hoses can cause serious injury. Do not use damaged,
frayed or deteriorated air hoses and fittings.
Carefully Read all instructions before operating or servicing
®
any Dynabrade
Abrasive Power Tool. Products offered by
Dynabrade are not to be modified, converted or otherwise
altered from the original design.
PD17-16
August, 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 53271 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dynabrade 53271

  • Page 1 9" (230 mm) 6,500 SANDER Find The Most Current Offering of Support Documents and Accessories at www.Dynabrade.com WARNING Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as well as adjacent areas.
  • Page 2 After maintenance is performed on tool, add a few drops of 95842 Dynabrade Air Lube to the tool inlet and start the tool a few times to • To ensure long life and dependable service, use a Closed Loop Air System lubricate air motor.
  • Page 3 Models Rebel Series Sanders 53271 - 7" Dia., 8,500 RPM Complete Assembly 53273 - 9" Dia., 6,500 RPM ITEM DESCRIPTION QTY. 50268 FLANGE 51151 7" SANDING DISC - 53271 50914 9" SANDING DISC - 53273 97311 WASHER 54931 AUTO BALANCER...
  • Page 4: Machine Specifications

    LIFETIME WARRANTY To validate Dynabrade Lifetime Warranty, you must register each tool at: www.dynabrade.com. Registration of each tool at website is required. Dynabrade will not honor Lifetime Warranty on unregistered tools. Please view the entire Lifetime Warranty Policy at www.dynabrade.com.

This manual is also suitable for:

53273

Table of Contents