Automatic Programmes; Setting A Programme - Bosch CMA585MS0A Instruction Manual

Automatic programmes

en
The cooking time has elapsed
A signal sounds and the start l stop symbol stops
lighting up. Combination mode has finished. Touch any
field to end the acoustic signal.
Changing the microwave power output
Touch ! until the required level is selected in the
display.
Notes
Touching it several times switches the power levels
■
from the highest to the lowest level.
If the microwave function is only added after the
■
start, the appliance pauses. Press start l stop to
start operation
Pausing the operation
Touch the start l stop field or open the appliance
1.
door.
The operation is suspended and the
start l stop LED flashes.
Close the appliance door.
2.
Touch the start l stop field.
3.
The operation is continued and the start l stop LED
lights up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
The fan may continue to run after the appliance
Note:
has been paused or stopped.
16
PAutomatic programmes
Y ou can prepare food really easily using the automatic
A u t o m a t i c p r o g r a m m e s
programmes. You select the programme and enter the
weight of your food. The automatic programme then
applies the most suitable settings. You can select from
15 programmes.
Notes
Take the food out of its packaging and weigh it. If it
■
is not possible to enter the exact weight, you should
round it up or down.
Place the food in the cold cooking compartment.
■
For the programmes, always use microwaveable,
■
heat-resistant cookware, for example made of glass
or ceramic. Observe the accessories tips in the
programme table.
For an optimal cooking result, use food that is in
■
good condition and chilled meat only. For frozen
food, use food straight out of the freezer only.

Setting a programme

Example in the picture: Programme 3 with a weight of 1
kg.
Set the function selector to % automatic
1.
programmes.
The first programme number and weight suggestion
are shown in the display.
Use the rotary selector to select programme number
2.
3.
Touch h.
3.
The weight setting is highlighted in the display.