Table of Contents
Advertisement
CORRECT
INCORRECT
INCORRECT
FIG 4
FIG.3
In order to install the hinge bolt
properly, keep it perfectly straight
as the bolt goes through the pedal
tubing and the crankshaft. If the
hinge bolt is connected to the
crankshaft at an angle, damage to
both
crankshaft may occur.
FIG.3:
Attach the Pedals (NO.23) to the
Pedal Posts (NO.11 & NO.12),
using two M10*45 Bolts (NO.24)
and two M10 Nuts (NO.13) for each
side.
FIG.4
When fixing your Handlebars (NO.26 &
NO.27), you can either select the
dual-action mode or the fixed mode.
Dual-action
handlebars to move along with the
pedals, attach them to the lower
handle bars. Select a height setting
that is comfortable for you and make
sure both handlebars are set at the
same height. Lock each handlebar in
place with the locking knobs (NO.28).
See Fig.4.
Fixed mode: To keep the handlebars
stationary, attach them to the tubing on
the main frame between the lower
handlebars.
As with the dual-action mode, set both
FIG.4
handlebars at the same comfortable
height and secure them in place with
the Locking Knobs (NO.28).
7
the
hinge
bolt
mode:
To
and
the
allow
the
Hide quick links:
Advertisement
Table of Contents
