Network Interface Specifications - Epson WF-C5210 User Manual

Network Interface Specifications

Wi-Fi
Standard
Security
Frequency band
Maximum radio-frequency
power transmitted
Communication mode
Ethernet
Standard
Communication mode
Connector
* Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
Security
IEEE802.1X; requires the connected device to comply with IEEE802.1x
IPsec/IP Filtering
IEEE 802.11 b/g/n; complies with either IEEE 802.11 b/g or IEEE
802.11 b/g/n, depending on purchase location
WPA2-PSK (AES); complies with WPA2 standards with support for
WPA/WPA2 Personal
WEP (64/128 bit)
2.4 GHz
19.8 dBm (EIRP)
Infrastructure mode
Wi-Fi Direct (Simple AP)
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
IEEE802.3i (10BASE-T)*
IEEE802.3u (100BASE-TX)
IEEE802.3AB (1000BASE-T)*
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
RJ-45
233