Table of Contents
Advertisement
Automatic reactivation of TRAC and VSC
■
Vehicles with smart key system
Turning the "ENGINE START STOP" switch off after turning off the TRAC
and VSC will automatically re-enable them.
Vehicles without smart key system
Turning the engine switch to the "LOCK" position after turning off the
TRAC and VSC will automatically re-enable them.
Automatic TRAC reactivation
■
If only the TRAC is turned off, the TRAC will turn on when vehicle speed
increases.
Automatic TRAC and VSC reactivation
■
If the TRAC and VSC are turned off, the systems will not turn on even when
vehicle speed increases.
Sounds and vibrations caused by the ABS, brake assist, TRAC and
■
VSC
A sound may be heard from the engine compartment when the engine is
●
started or just after the vehicle begins to move. This sound does not indi-
cate that a malfunction has occurred in any of these systems.
Any of the following conditions may occur when the above systems are
●
operating. None of these indicates that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
• The brake pedal may pulsate slightly after the ABS is activated.
• The brake pedal may move down slightly after the ABS is activated.
2-4. Using other driving systems
2
230
Advertisement
Table of Contents
