INSPECTION DETAILS - C. LEFT FRONT
DRIVING POSITION MEMORY SYSTEM
a) Set driving position: With the engine switch in ON mode
and the shift lever in the "P" position, check the operation:
1. Adjust the driver's seat, steering wheel, outside
rearview mirrors and HUD* to the desired positions.
2. While pressing the "SET" button, press button "1," "2"
or "3" until the buzzer sounds.
3. Check all buttons (1, 2 and 3) to make sure that all
memorized settings operate correctly.
b) Register set driving positions to a key: With the shift
lever in the "P" position, close the driver's door and turn
the engine switch to ON mode.
1. Register a driving position to the button "1", "2" or "3."
2. Do not carry more than one key (including a card
key*) when registering. While pressing the button "1,"
"2" or "3," press the driver's door lock switch (either
lock or unlock switch) until a signal beeps.
3. Unlock the driver's door using the entry function or
wireless remote control, open the driver's door, and
check that the stored driving position is recalled.
c) Power easy access system
Check that the steering wheel and driver seat
automatically adjust to allow the driver to enter and exit
the vehicle easily.
16
* If equipped
GS200t/350/450h/F