Quick Menu; Setpoints: Local Col And Heat/Current Cool And Heat; Information; Data (Alarm) Log - Bard MULTI-TEC W18AAPA Service Instructions Manual

Quick Menu

Setpoints
If at any time the unit(s) loses communication with the
LC6000 controller, the unit(s) will go to stand alone
mode. The setpoints are synced with the LC6000 when
communication is established. The unit will save and
control to these values until communication is re-
established.
To change the cooling and heating setpoints:
1. From the Status screen, press UP or DOWN key
until Quick Menu displays Setpoints icon. Press
ENTER key.
2. Press ENTER key to scroll to the selected choice
(see Figure 5).
3. Press UP or DOWN key on desired value until value
displays correctly.
4. Press ENTER key to submit value and move to next
parameter.
5. Press ESCAPE key until Main Menu screen is
displayed.
FIGURE 5
Cooling and Heating Setpoints

Information

These screens show unit demand, wall-mount unit
status, serial/model number, hours, run hours, averages
and software version information.

Data (Alarm) Log

The alarm log screens show a log of each alarm (see
Figure 6. There will be a log for when alarm occurred
and if the alarm auto clears, it will show when the
alarm cleared. See page 11 for instructions on clearing
the alarm logs.
NOTE
Screenshots shown in this manual reflect
default settings (when applicable).
Manual 2100-665D
Page 8 of 26
FIGURE 6
Alarm Log Screen Breakdown
TABLE 2
LC1000/TEC-EYE Passwords (Defaults)
User
Technician
Engineer
Use UP or DOWN keys and ENTER key to enter password

Menu Screens and Password Levels

A System Config: User (2000)
B Adv Sys Config: Technician (1313)
C I-O Config: Technician (1313)
D On/Off: User (2000)
E Alarm Logs: User (2000)
F
Settings
Date/Time: Technician (1313)
Language: User (2000)
Network Config: Technician (1313)
Serial Ports: Technician (1313)
Initialization
Clear Logs: User (2000)
System Default: Engineer (9254)
Restart: User (2000)
Parameter Config: Engineer (9254)
Alarm Export: User (2000)
G Logout: Used to log out of the current password
level. Entering back into the menu requires
password.

Additional Features

Model/Serial Number Retain Feature

Model numbers and serial numbers will be retained
through most software updates. It still remains good
practice to verify the software version, model numbers
and serial numbers of any wall-mount unit after a
software update, as some functionality of the MULTI-
TEC wall-mount unit require a specific model number.
Alarm Log Number
Alarm Date/Time
Alarm Index
Number
Alarm Description
Alarm Event Type
(Start/Stop)
2000
1313
9254