Table of Contents
Advertisement
Maintenance
Use of the appliance
Objects or structural obstacles (furniture, curtains, plants,
leaves, blinds, etc.) must not obstruct the normal air flow
both from the internal and from the external grids.
Do not lean against, or worse sit on, the body of the
conditioner, this would damage the appliance.
Do not move the horizontal air outlet flap manually.
Always use the remote control to perform such operation.
In the event of water leaks, turn off the appliance and
disconnect the electric power supply. Call the nearest
service centre.
Operations after installation
Before leaving the site it is advisable to collect the packaging
and eliminate all traces of dirt that has deposited on the
unit during assembly using a damp cloth. These operations,
which are not strictly necessary, in any case allow for a more
professional appearance of the installation in the eyes of the
User.
To avoid unnecessary calls by the User, before leaving the
site it is also a good idea to:
-
show them the contents of the Manual,
-
show them how to clean the filter,
-
explain when and how they should contact Customer
Service.
Soloclim
During heating mode, the conditioner eliminates
periodically any ice formed on the external battery. In
such situation, the machine keeps on working but it does
not dispense warm air to the room. This phase can last 3
up to maximum 10 minutes.
The appliance must not be installed in rooms where
explosive gases develop or where there are humidity and
temperature conditions that exceed the maximum levels
reported on the installation manual.
Clean the air filter regularly as described in the specific
paragraph.
GB
15
Advertisement
Table of Contents
