Manufacturer's Recommended Inspections - Lennox CIC 020S Installation, Operation & Maintenance Manual

POINTS TO BEAR IN MIND
DANGER AND WARNING SIGNS
Abrasive surfaces Low temperatures
ELECTRICAL CONNECTIONS
To prevent serious electrical injuries, make sure to switch off the power before doing any installation,
repair or maintenance work on the unit.
To install the unit, bear in mind local and national legislation.
ATTENTION - WARNING
Electric shock can cause injury or death. Before attempting
to perform any service or maintenance on the unit, turn
OFF the electrical power, and check that the fan has
stopped.
CLEANING THE FILTER
Check the air fi lter and make sure
it is not blocked with dust or dirt.
Standard Guidelines for Lennox equipment.
All technical data contained in these operating instructions, including diagrams and technical descriptions, remain the property
of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment), reproduced, photocopied,
transferred or transmitted to third parties without prior written authorization from Lennox.
Data published in the operating instructions are based on the latest information available. We reserve the right to make
modifi cations without notice.
We reserve the right to modify our products without notice and with no obligation to modify goods previously supplied.
These operating instructions contain useful and important information for the smooth operation and maintenance of your equipment.
The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the equipment and
during its operation and how to ensure smooth and fault-free operation. Read the operating instructions carefully before starting
the equipment, familiarize yourself with the equipment and with handling the installation and carefully follow the instructions. It is
very important to be properly trained in handling the equipment. These operating instructions must be kept in a safe place near
the equipment.
Like most equipment, the unit requires regular maintenance. This section concerns maintenance personnel and management.
If you have any queries or would like to receive further information on any aspect relating to your equipment, do not hesitate to
contact us.
The manufacturing of these units is made under the requirements of the ISO 9001 and ISO 14001.
High temperatures Risk of injury from
moving objects
The air fi lter cleaning operations does not require technical
service; however, when an electrical or mechanical
operation is required, call an Engineer.
2
Electrical voltage
If the fi lter is dirty, wash it in a bowl with neutral soap and
water, drying it in the shade before re-inserting it in the
unit.
Risk of injury from
rotating objects