Sony WH-1000XM2 Help Manual page 37

Touch [WH-1000XM2].
4
You hear voice guidance "BLUETOOTH connected".
Hint
The above procedure is an example. For details, refer to the operating instructions supplied with your iPhone.
If the iPhone was connected with the headset the last time, an HFP/HSP connection is made when you turn on the headset.
While the headset is on, you can make an A2DP connection (music playback) by double-tapping the center of the touch sensor
control panel lightly (about 0.4-second interval).
Note
If the last-connected BLUETOOTH device is put near the headset, the headset may connect automatically to the device by simply
turning on the headset. In this case, deactivate the BLUETOOTH function on the BLUETOOTH device or turn off the power.
If you cannot connect your iPhone to the headset, deactivate pairing on your iPhone and perform pairing again. For details, refer
to the operating instructions supplied with your iPhone.
Related Topic
How to make a wireless connection to BLUETOOTH devices
Pairing and connecting with an iPhone
Listening to music from a device via BLUETOOTH connection
4-697-257-11(2) Copyright 2017 Sony Corporation
37