Table of Contents
Advertisement
4.5
Overview
Taking a picture
step-by-step
4.6
Calibrate the touch
screen step-by-step
CS25 (GNSS/LRBT) plus, Operation
Using the Digital Camera
The CS25 plus tablet computer is equipped with a digital camera located at the under-
side. Refer to "2.4 CS25 plus Components".
Step Description
1.
Press F1 function key to start HotTab Hotkey Utility application. Refer to "5.2
Hot Tab Software Utility Functions".
2.
Assign Webcam to F2 Short function key.
3.
Press and release F2 function key to start the digital camera application.
4.
Aim the camera to the desired target.
5.
Check the view at the display.
6.
Click the camera icon on the top bar to take the picture.
The digital camera application allows recording videos as well as taking
images. In addition, the LED light can be turned on and off.
7.
Click the return icon on the top bar to store the picture and to return to the
main menu. Click the garbage icon to reject the picture.
Calibrating the Touch Screen
Step
Description
1.
Turn on the CS25 plus tablet computer. Refer to "4.2 Power Functions".
2.
Click on Start button, then go to Control Panel.
3.
In Category view, click on Hardware and Sound link, click on Tablet PC
Settings and then go to Display Tab.
In Icons view, click on Tablet PC Settings icon, and then go to
Display Tab.
4.
Click on Calibrate... to start the Digitizer Calibration Tool.
5.
Tap the crosshair with the stylus each time it appears on the screen.
A window pops up when the calibration process is completed.
6.
Click on Yes to save the calibration data or click on No to reject the calibra-
tion data.
25
Advertisement
Table of Contents
