Switching Between Left And Right Battery - Leica CS25 GNSS plus User Manual

Hide thumbs

Table Of Contents

Table of Contents

Charge battery

step-by-step

Battery charging

modes

4.3.4

Switch between left

and right battery

step-by-step

CS25 (GNSS/LRBT) plus, Operation

CS25_010

Step

Description



Only use the charger delivered with the tablet computer.



When charging the batteries, the tablet computer can be on or off. Charging

is faster when the tablet computer is off.

Connect the ALG7-13B power adapter or HH-12VB car adapter with the

tablet computer and an A/C plug. The batteries start charging.

The power LED on the tablet computer switches on. When tablet computer's

batteries are fully charged the LED switches off again.



Refer to " LED indicators" for information about the power LED.

Balanced battery charging mode

Both battery packs are at a very low-power level of << 10% of their charging capacity.

a) The second battery is charged first if the difference of the battery power level is

5% or more.

b) If the difference of the battery power level both batteries is less than 5%, the

batteries are charged simultaneously.

Dual battery charging mode

Both battery packs are at a low-power level about of 10% of their charging capacity.

a) If the power level of both batteries is below 10%, the batteries are charged simul-

taneously.

b) If the power level of both batteries is higher than 10%, the tablet computer

switches into balanced charging mode.

c) If one battery is fully charged while the other one is at a low-power level, the low-

power battery is charged.

d) If both batteries are fully charged, charging is switched off automatically.