Table of Contents
Advertisement
Insert and remove a
SIM card step-by-
step
CS25 (GNSS/LRBT) plus, Operation
Apply general practice for working with static-sensitive devices when you open the
tablet computer, insert the SIM or SD card and closing the tablet computer:
• Discharge any static charge before opening the tablet computer and working with
the SIM or SD card.
• The tablet computer must not be subject to high electrostatic potentials when it is
open.
• Minimise contact with internal components of the tablet computer.
• Avoid any discharges of static electricity near the tablet computer when inserting
the SIM or SD card.
3
4
CS25_011
Step
Description
The SIM card is inserted into a SIM card holder inside the tablet computer.
For CS25 LRBT plus:
Remove the Long Range Bluetooth module labelled 'bluegiga' before
inserting the SIM card.
1.
Turn off the tablet computer.
2.
Turn over the tablet computer to the underside.
3.
Loosen the screws inside the cover using the screwdriver end of the stylus.
4.
Detach the cover from the tablet computer.
For CS25 GNSS plus: Detach the cover carefully to not damage the
cables of the Helix antenna.
5.
For CS25 LRBT plus:
Remove the screw in order to access the SIM card. Slightly lift the cover
plate.
6.
Slide the SIM card firmly into the slot.
Do not force the card into the slot. The card should be held with the
contacts facing the slot.
7.
Close the SIM card holder and push into locked position.
8.
Attach the slot cover and tighten the screws.
9.
To remove the card, detach the slot cover of the tablet computer.
10.
Open the SIM card holder and remove the SIM card.
11.
Remove the SIM card and attach the slot cover.
LOCK OPEN
5
18
Advertisement
Table of Contents
