Table of Contents
Advertisement
Insert and remove
an SD card step-by-
step
CS25 (GNSS/LRBT) plus, Operation
5
007408_001
Step
Description
The SD card is inserted into an SD card holder inside the tablet computer.
1.
Turn off the tablet computer.
2.
Turn over the tablet computer to the underside.
3.
Loosen the screws inside the cover using the screwdriver end of the stylus.
4.
Detach the cover from the tablet computer.
For CS25 GNSS plus: Detach the cover carefully to not damage the
cables of the Helix antenna.
5.
Remove the two cables on the tablet computer.
6.
Loosen the screw fixing the modem. The SD card slot is visible.
7.
Slide the SD card firmly into the slot.
Do not force the card into the slot. The card should be held with the
contacts facing the slot.
8.
Close the SD card holder and push into locked position.
9.
Insert the modem and tighten the screws.
10.
Attach the two cables in their original position.
11.
Attach the slot cover and tighten the screws.
3
4
6
LOCK OPEN
7
19
Advertisement
Table of Contents
