Seat Adjustment - Chevrolet Chevy II 1965 Owner's Manual

FRONT SEAT ADJUSTMENT
Fasten your seat belt by pushing the metal catch
into the buckle until it "snaps" into place. Tighten the
belt until comfortably snug by pulling on the loose end
ext~nding
from the buckle. Do not wear belt loosely.
loosen ,by turning the entire buckle outward.
lift
up the
buckle lever to unlatch and release the belt.
Never buckle
an
individual seat belt
around
more than
one
person.
It is recommended that seat belt retractors be used
on the outboard belt half only. When buckling the belt
be sure it is fully extended so there is no webbing wound
around
the retractor drum,
then adjust for proper flt at
the buckle.
Clean belts when necessary, without removing from
the car, with a stiff bristle brush using a detergent rec-
ommended for nylon.
Never bleach or dye seat belts.
20
The front seat may be quickly and easily adjusted
forward or rearward to provide maximum driving com-
fort. (Your Authorized Chevrolet Dealer can make addi-
tional adjustments to further tailor the seat to your
particular comfort requirements.)
Pull back the seat adjuster lever, located on outboard
side of the front seat, to unlock the seat and dHow ad-
justment to the front or rear. As the seat slides for-
ward, it tilts also to provide best posture and increased
driving edse. Release the lever to lock the seat in the
desired position.
REGULAR
EQUIPMENT BELT