Switching On Your Unit For The First Time - Hitachi KHI340E Instruction Manual

Switching on Your Unit for
the First Time
When you first connect the unit to the mains
socket, the unit will be in STANDBY mode.
Press the STANDBY button on the unit or
the remote control to switch on the unit.
1. For initial use, the unit will
automatically enter the Network mode
and start the auto scanning for Internet
Network.
2. Once an Internet network is found, it
will show all available networks on the
display.
Turn the SCROLL
3.
unit or press the SCROLL
on the remote control to select the
network, and then press the SELECT
button on the unit or the remote
control to confirm.
4. The display will show "Enter WEP
Key" or "Enter WPA Key" for wireless
network which is secured. (The unit will
automatically detect either WEP or WPA
key input depending on Wi-Fi modem/
router setting).
5. Turn the SCROLL
unit or press the SCROLL
on the remote control to select
alphanumberic letters, and then press
the SELECT button on the unit or the
remote control to input.
control on the
buttons
control on the
buttons
GB
19