Fm Operation; Switching From Dab To Fm Mode; Auto Scan; Manual Scan - Hitachi KHD150E Instruction Manual

FM Operation

Switching from DAB to FM Mode

To switch the unit from DAB to FM mode, press FM/DAB once.
GB

Auto Scan

To search for an FM station, press Tune/Vol. repeatedly to active
tuning function of Scroll/Select dial. Turn Scroll/Select dial clockwise/
anti-clockwise and then press Scroll/Select to start the forward or
reverse scanning. Once a station has been found, the scanning will stop
automatically.

Manual Scan

To search for FM stations manually, press Tune/Vol. repeatedly to active
tuning function of Scroll/Select dial. Turn Scroll/Select dial clockwise/
anti-clockwise until your desired frequency is reached.
With FM radio, it may be necessary to fine tune each station by turning
Scroll/Select dial. Each turn will adjust the frequency by 0.05 MHz. If
reception is still poor, adjust the position of the aerial or try moving the
radio to another location.

Scan Setting

This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press and hold Info/Menu and then turn Scroll/Select dial to select
<Scan setting>. Press Scroll/Select to confirm.
2. Turn Scroll/Select dial to select <All stations> or <Strong stations
only>. Press Scroll/Select to confirm.
20