Turn the SCROLL
6.
unit or press the SCROLL
on the remote control to select "END",
and then press the SELECT button
on the unit or the remote control to
complete type in.
7.
If the WEP/WPA key input is correct, the
GB
display will show "Network Ok".
8.
The initial setting is now completed.
After the first network connection completes, the unit may automatically
update the settings for functionality enhancement through the network.
After the update, the unit will reconnect to the network and is ready to use.
This may take a few minutes.
General Operation
Powering ON/OFF
When you first connect the unit to the mains socket. The unit will be in
STANDBY mode.
Press the STANDBY button on the unit or the remote control to
•
switch the unit on.
Press the STANDBY button on the unit or the remote control to
•
switch the unit back to standby mode.
•
Disconnect the mains plug from the mains socket if you want to
switch the unit off completely.
20
control on the
buttons