Sensor Keys; Switch On/Off The Appliance; Standby-Mode; Lock/Unlock Panel - Haier HRF520BW User Manual

Use

Sensor keys

The buttons on the control panel are sensor keys, which respond when lightly touched
with the finger.

Switch on/off the appliance

The appliance is in operation as soon as it is connected to the power supply.
When the appliance is powered on for the first time, indicator "b2" is shining on the display
until the temperature reaches -5°C or after 1 hour working. The temperatures displayed
in "a2" and "b2" will show the actual temperatures in the compartment.
Notice
▶ The appliance is preset to the recommended temperature of 3°C (refrigerator) and
- 18°C (freezer). Under normal ambient conditions you need not set a temperature.
▶ When the appliance is switched on after disconnection from the main power supply, it
may take up to 12 hours for the correct temperatures to be reached.
Empty the appliance before switching off. To switch off the appliance, pull the power cord
out off the power socket.

Standby-mode

The display screen turns off automatically 30 seconds after pressing a key. The display will
be automatically locked. It lights up automatically when pressing any key or opening the
door (alarm does not light up the display screen).

Lock/unlock panel

▶ Touch button "D" for 3 seconds to block all panel
elements against activation. The related indicator
"d" is now displayed.
▶ To unlock, press button "D" again.
Notice
The control panel is automatically blocked against activation if after 30 seconds no but-
ton is pressed. To change any settings the control panel must be unlocked.
16
Lock
Hold 3 Sec.