Driver Position Memory System; Storing Memory Positions; Recalling Memory Positions - Hyundai i30 2018 Owner's Manual

D D R R I I V V E E R R P P O O S S I I T T I I O O N N M M E E M M O O R R Y Y S S Y Y S S T T E E M M ( ( I I F F E E Q Q U U I I P P P P E E D D ) )
The Driver Position Memory System
is provided to store and recall the fol-
lowing memory settings with a sim-
ple button operation.
- Driver's seat position
- Outside rearview mirror position
- Instrument panel illumination intensity
WARNING
Never attempt to operate the driv-
er position memory system while
the vehicle is moving.
This could result in loss of con-
trol, and an accident causing
death, serious injury, or property
damage.
i Information
• If the battery is disconnected, the
memory settings will be erased.
• If the Driver Position Memory
System does not operate normally,
we recommend that you have the
system checked by an authorized
HYUNDAI dealer.

Storing memory positions

OPDE046010
1. Place the ignition switch or the
Engine Start/Stop button in the
ON position.
2. Adjust the driver's seat position,
outside rearview mirror position
and instrument panel illumination
intensity to the desired position.
3. Press the SET button. The system
will beep once and notify you
"Press button to save settings"on
the LCD display.
4. Press one of the memory buttons
(1 or 2) within 4 seconds. The sys-
tem will beep twice when the mem-
ory has been successfully stored.
5. "Driver 1 (or 2) settings saved" will
appear on the LCD display.

Recalling memory positions

1. Place the ignition switch or the
Engine Start/Stop button in the
ON position.
2. Press the desired memory button
(1 or 2). The system will beep
once, then the driver's seat posi-
tion, outside rearview mirror and
instrument panel illumination will
automatically adjust to the stored
position.
3. "Driver 1(or 2) settings is applied"
will appear on the LCD display.
3
3-17