Initial Settings
Initial Settings
Startup
When the power (or ignition) switch is set to
the ACC or ON position, the product is turned
on. The first time the product is turned on, the
caution message screen is displayed. Perform the
following procedure to start the system.
1
Set the power (or ignition) switch to
the ACC or ON position.
2
Select the language used for on-
screen information.
LinkDisplayAudio_NAS.indb 13
LinkDisplayAudio_NAS.indb 13
3
Read the message, then touch [Agree].
The <Home> screen is displayed.
Setting the clock
Set the clock time displayed on the screen.
1
Display the <Settings> screen.
On the <Home> screen, touch [Settings].
2
Display the <Clock> settings screen
(1), then select the setting method
(2)
.
• Touch [<<]/[>>] repeatedly to display the
[Clock] setting tab. (Page 12)
<Auto>
Synchronizes the clock time
with the GPS. (Go to step
• When the GPS signal
reception is not good, it takes
time to set the clock time.
<Manual>
Set the date and clock time
manually. (Go to step
• The check mark (
) appears in the check
box of a selected item.
ENGLISH
3
.)
4
.)
13
5/12/16 5:38 PM
5/12/16 5:38 PM