Table of Contents
Advertisement
[–] and [+] Keys
Pressing [–] reduces the currently displayed number or value
by one, while [+] increases it by one. Holding down either key
will sequentially increase or decrease the displayed number
or value until you release the key. Pressing both keys at the
same time will return the number or value to its initial default
or recommended setting.
If input of a negative value is allowed, pressing [–] while the
value is flashing on the display will add a minus sign (–) to the
left of the value. Pressing [+] while the value is flashing on the
display changes back to a positive value.
[2] (o), [3] (p), [5] (EXIT), and [6] (ENTER)
Keys
Depending on the operation being performed, [2] (o), [3]
(p), [5] (EXIT), and [6] (ENTER) key operations are enabled
while the NUM indicator is not shown on the display.
[5] (EXIT) Key Long-press
After configuring function settings with the Function (cs)
button, you can exit the setting screen by long-pressing [5]
(EXIT). For details, see "FUNCTION Button (cs) Functions"
(page EN-43).
Categories
In the modes listed below the category (group) of the currently
selected type will be shown on the display. You can change
the category, if you want.
• Tones
• Rhythms
• Songs
• Music Presets
To check the current category
1.
Press bo CATEGORY.
Each press of bo CATEGORY selects the first number
of the next sequential category.
Category number
P i a n o
• After pressing bo CATEGORY, you can also scroll
forward and back between category names using the
dk [–] and [+] keys.
• If you do not perform any operation for a while after
displaying a category, the display will automatically
return to the previous screen.
2.
To return to the previous screen, press
cs FUNCTION.
Category name
• For information about the categories available in each
mode, refer to the "Category" column of the lists.
• You can directly scroll between top entries of categories by
holding down bo CATEGORY as you use the dk [–] and
[+] keys to scroll.
Returning the Digital Keyboard to
Its Factory Default Settings
Perform the following procedure when you want to return the
Digital Keyboard's stored data and settings to their initial
factory defaults.
See Function No.73 under "FUNCTION Button (cs)
Functions" (page EN-43).
General Guide
EN-7
Advertisement
Table of Contents
