Table of Contents
Advertisement
Changing the Beats Per Measure
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
• You can specify a value from 0 to 9 as the number of beat
per measure.
1.
Hold down cq METRONOME until the beats
per measure setting screen appears on the
display.
B e a t
2.
Use the ct number keys, and the dk [–] and [+]
keys to select a beat setting.
• The bell will not sound if you specify 0 (Bell Off) for this
setting. This setting lets you practice with a steady
beat, without worrying how many beats there are in
each measure.
• You can also use the cs FUNCTION button to configure
settings. See Function No.11 under "FUNCTION Button
(cs) Functions" (page EN-43).
To change the metronome sound volume
See Function No.12 under "FUNCTION Button (cs)
Functions" (page EN-43).
Changing the Tempo Setting
There are two ways to change the tempo (beats per minute)
setting: using buttons to change the tempo value and tapping
a beat with a button.
■ Method 1:
To adjust the tempo (beats per minute) value
1.
Press cr TEMPO/TAP to make "Tempo"
appear on the display.
2.
Use the ct number keys, and the dk [–] and [+]
keys to change the tempo value.
• Holding down either button changes the value at high
speed.
• You can specify a tempo value in the range of 20 to
255.
• You can set the currently selected song, or rhythm and
music preset to the recommended tempo by long
pressing cr TEMPO/TAP.
3.
To return to the previous screen, press
cs FUNCTION.
■ Method 2:
To adjust the tempo by tapping a beat (tap input)
1.
Tap the cr TEMPO/TAP button a number of
times at the tempo you want to set.
• The tempo setting will change in accordance with your
tapping.
• After you use this method to specify the approximate
tempo, you can then use the procedure under "To
adjust the tempo (beats per minute) value" to adjust
the setting to a more exact value.
Tap Rhythm Start
While tap rhythm start is enabled, rhythm can be started in
accordance with a tempo you tap on the cr TEMPO/TAP
button.
See Function No.63 under "FUNCTION Button (cs)
Functions" (page EN-43).
Playing the Digital Keyboard
Tap two or more times.
EN-11
Advertisement
Table of Contents
